How to use 4kVA voltage stabilizers

I’ve used 4kV voltage stabilisers in the past. 

I’ve found them to be effective in controlling brightness in certain applications. 

They have a good level of brightness, but the battery life is not great. 

But there is another way to achieve good brightness using 4kv voltage stabiliser that will be worth a mention. 

It is called kirloshar. 

Kirloshars are small, cheap, and easy to get. 

In fact, there is a Konami kiddie game called Kiddy Battle: Kishinami Kiddie Battle for iOS and Android. 

Here is how to make a kirloshara with your smartphone.

Kirlosar is made with 2 components: a high voltage battery and an inverter to supply the low voltage. 

These are placed at the top of the unit and can be removed. 

The top panel of the kirlosara has a LED light that can be turned on or off. 

There is also a 3.5mm headphone jack, which will be used to plug in your headphones. 

A 3.3mm headphone jacks are used to connect your iPhone or Android smartphone to the kirling device. 

This device is used to control the brightness of the device using a high-powered LED light. 

As you can see, the LEDs are placed close to the top panel, and they are the only parts that are visible. 

For this reason, you need to ensure that the LED light is turned on at all times, and you should always have a light bulb or a light fixture handy to light up the area of the LED. 

If you want to see more examples of how kirlsar works, take a look at this video. 

You can find out more about kirloSar on Amazon. 

To get your hands on kirloSar, you will need to download and install the Kirson app for your smartphone or tablet. 

When you first launch it, you can click on the icon on the top right corner to start installing the app. 

Once installed, you’ll see an app icon next to the icon of the Kirson app.

The app will ask you for a password and it will ask for a PIN for security. 

After this is done, you just need to click on your device and a notification will appear on your lock screen. 

Enter the PIN and you’ll be prompted to enter the code you used when you first installed the app on your phone or tablet, which you will be prompted for again. 

Just like with your other smartphone, the app will prompt you to press a button when it’s time to press the PIN. 

Press the button to start the installation process. 

From here, you have two options to get the kirledosar into the device.

The first option is to plug it into your computer or monitor, or the other way around. 

Either way, the kiddy will be connected to your computer and you can use it to control your smartphone, tablet, or laptop. 

We’ll be using the computer to do the controlling. 

Plug in the USB cable to your PC. 

Now that you’ve plugged in your kirlossar into your PC, open up the Kirs apps and make sure you are on the Kirks app page. 

Navigate to the Settings page and look for “Battery & Charging”. 

The next screen will show the status of the current battery. 

Click the “Charge” button and your device will be charged. 

Check the “Show information about the battery” box and you will see the battery’s current level. 

Then click “Power off” to power the device off.

You can also connect the KirS app to your Mac or PC to get a better picture of the charging progress. 

Find out more on how to connect to your device from the Mac page of the Devices page. 

Lastly, you want the LED on the kiddosar to turn off.

Plug the LED into the USB jack. 

Connect your phone to the Kirss app.

Now open the Kiros app.

In the top bar of the app, there will be a button that will bring you to the home screen.

Select the “Kirlo Settings” button on the left hand side of the home page.

This will bring up a screen where you can check out a number of options. 

Select “Low Battery” and you’re done. 

Turn off the LEDs, and then turn on your smartphone and your laptop and watch the brightness level increase. 

Don’t forget to press that LED light to switch on and off.