With iPhone 7, iPhone 7s, iPhone SE, iPhone 8, iPhone X, and iPhone XS, you’ll get more battery life by using a USB-Savvy USB Power Adapter.

If you have a MacBook Pro or MacBook Pro Retina, you can use this adapter to add a USB Type-C connector for the power adapter.

It’s not compatible with MacBooks with Touch Bar, but it will work with any MacBook with a Thunderbolt 3 port.

If your Mac is using the MacBook Air or MacBook Air Pro, you won’t need this adapter.

We’ve put together a video to show you how to use it, along with how to set it up with a USB charger.

Before you start installing a voltage-saver adapter, be sure to check the compatibility list for your device.

Make sure your USB power adapter is compatible with your Mac, MacBook, or iPad, and make sure that it’s rated for up to 100A.

You can also check the manufacturer’s ratings, which can vary depending on the device.

For Macs, Apple’s recommended USB power adapters are USB-C, USB-A, and USB-B.

MacBooks and MacBook Pros with Touch Bars, Thunderbolt 3 ports, and a Micro-USB port are compatible with these adapters.

For MacBooks that don’t have Touch Bars or Thunderbolt 3, you will need to use the Apple USB-P port for power.

For other MacBooks, you may need to go to Apple’s support site to find a specific adapter.

The first step is to download and install the latest version of macOS.

On some Macs it’s free, while others require a subscription.

After you download and run the installer, you should see a list of compatible adapters.

Make your selections in the list and follow the prompts to install.

When the Mac is powered on, click on the Power icon to start the USB power management.

From there, you might need to click on Power Save to save the settings.

Then, choose Power Saving to save power for an extended period of time.

You’ll see a message that you’ll need to reboot the Mac every five minutes to make the changes.

The power saving mode will automatically shut off once you’re done saving power.

If you want to change the settings later, you need to save it again and click Power Save again.

Then click Power to save again.

When you’re finished saving power, click Power Restart to reboot your Mac.

Once the Mac boots up, it will reboot to the settings you set.

Then you’ll see your new settings.

The changes you made are saved in the Power Save file you created earlier.

Now you can reboot the computer and see the changes again.

This will take a few minutes.

You may also need to restart your Mac to get all the settings back.

You can also turn on the USB Power Savvy feature for a short period of the time.

This feature allows you to save a few percent of the power of your Mac by enabling a USB Power Save.

To turn on USB PowerSavvy, click the Power button and then the Power Savvvy icon.

Then select Enable USB PowerSave.

You’ll be able to save up to 10 percent of your computer’s power.

It takes about 10 minutes to save 100 percent of power, so be sure you don’t leave your computer running too long before you turn on this feature.

When your Mac reboots, the USB-savvy feature will be enabled for a few seconds.

When it comes back on, it should save you from rebooting your computer for about 30 seconds.